SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#201101 - 10/01/04 01:12 PM "Foot Pedal 1 Default Sustain / 2 DSP Variation" on PSR3000?
Starkeeper Offline
Member

Registered: 09/16/02
Posts: 1704
Loc: Toronto
Can someone explain the pedal inputs on the PSR1500/PSR3000?
How many inputs are there?
Can they be used as a switch, a sustain pedal, and an expression pedal? The specs on the Yamaha.com website is not very clear.
Starkeeper
_________________________
I play Roland EM20 and Yamaha PSR550

Top
#201102 - 10/01/04 04:55 PM Re: "Foot Pedal 1 Default Sustain / 2 DSP Variation" on PSR3000?
Beakybird Offline
Senior Member

Registered: 01/27/01
Posts: 2227
There are two footswitch inputs. These can be programmed for a wide variety of functions including fills, sustain, sostenuto, harmony/echo, harmonizer, multipad, ots changes, etc.

I am using a midi sustain unit plugged into the midi in of my PSR3000 in order to allow me to use the two footswitch inputs for other functions. So basically, I have three footswitches.

The dearth of footswitch inputs is a definite negative for the PSR3000.

Beakybird

Top
#201103 - 10/02/04 10:08 PM Re: "Foot Pedal 1 Default Sustain / 2 DSP Variation" on PSR3000?
deatonent Offline
Member

Registered: 05/28/00
Posts: 292
Loc: Tazewell, VA, USA
Beakybird,
Could you give me a bit more info on the midi sustain unit and where I might obtain one?
Thanks,
Deaton

Top
#201104 - 10/04/04 12:03 PM Re: "Foot Pedal 1 Default Sustain / 2 DSP Variation" on PSR3000?
Starkeeper Offline
Member

Registered: 09/16/02
Posts: 1704
Loc: Toronto
Can they both be used as expression pedals as well?
Starkeeper
_________________________
I play Roland EM20 and Yamaha PSR550

Top
#201105 - 10/04/04 12:18 PM Re: "Foot Pedal 1 Default Sustain / 2 DSP Variation" on PSR3000?
DonM Offline
Senior Member

Registered: 06/25/99
Posts: 16735
Loc: Benton, LA, USA
Quote:
Originally posted by Starkeeper:
Can they both be used as expression pedals as well?
Starkeeper


They can, but I have to ask--why?
DonM
_________________________
DonM

Top
#201106 - 10/04/04 02:23 PM Re: "Foot Pedal 1 Default Sustain / 2 DSP Variation" on PSR3000?
Starkeeper Offline
Member

Registered: 09/16/02
Posts: 1704
Loc: Toronto
I wouldn't be plugging in two exression pedals, if that's your question. I want to be sure that these keyboards have expression pedal inputs, because I think I would use it, especially when playing the non-touch-sensitive organ voices. I was wondering, if each input had different functions.
Starkeeper
_________________________
I play Roland EM20 and Yamaha PSR550

Top
#201107 - 10/04/04 06:53 PM Re: "Foot Pedal 1 Default Sustain / 2 DSP Variation" on PSR3000?
Beakybird Offline
Senior Member

Registered: 01/27/01
Posts: 2227
You can assign each of the two inputs to about 24 different functions for a footswitch or expression pedal.

I'm selling one of my midi sustain units. I bought it for $100 from a fellow in Ireland. I have never used it. I'm selling it for $75.

It is light, about 30% bigger in size than the Yamaha PA-300 power adapter that comes with the PSR3000/2100/2000.

It's got one 1/4" input and one midi output. It runs on one 9 volt that lasts about 80 hrs. LED turns on when you plug in a 1/4" footswitch. Turns off when you remove it.

Once you set up a Yamaha to receive a message on midi channel one, you never have to do another thing with it.

I have one that I've been using for about two years. Problem free. I bought another one for backup, but now I have a midi solutions programmable unit that works just as good. The midi solutions footswitch controller goes for $99.

If anyone's interested, they can contact me.

Beakybird

Top

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online